一．適用：
牛仔布(涂層布，壓光布除外)、硅油布、尼龍布、TPU、PU皮革等。
二．性能指標：
外觀及組成：半透明狀粘稠體，聚氨酯聚合物
布氏粘度：120000~140000CPS
PH值：7.0±0.5
固體含量：50%±1
三．特性：
PU200A牛仔水性墨白（防凍防污染型）：牢度超強，不粘手，高光澤，水洗牢度超好，高附著力，耐黃變，抗凍型
PU200B牛仔水性墨透（防凍防污染型）：牢度超強，不粘手，高光澤，水洗牢度超好，高附著力，耐黃變，抗凍型
四．參考配方
|
調深色 |
調淺色 |
||
|
PU200牛仔墨白 |
20% |
PU200牛仔墨白 |
60% |
|
PU200牛仔墨透明 |
80% |
PU200牛仔墨透明 |
40% |
|
色漿 |
3-5% |
色漿 |
3-5% |
|
1008固化劑 |
2.5% |
1008固化劑 |
2.5% |
|
1、印前:先將固化劑加入漿內充分?jǐn)嚢杈鶆颍』ㄉ珴{添加量換控制在8%以?xún)?nèi)。 2、印后:印花成品自然干燥24小時后，或180℃壓燙20秒，或180℃烘2~3分鐘即可水洗。 3、加入固化劑的石磨膠漿必須在6~8小時內用完。 |
|||
注意事項：
由于牛仔面料多種多樣，在印花之前需要先行測試。在有涂層的布料上印花，需要測試布料涂層跟PU體系的粘結強度.
Other detailed information
|
Brand |
Conghui |
Model |
200 |
|
Viscosity |
/ |
PH Value |
7.0±0.5 |
|
Odor |
/ |
Strength |
100T |
|
Fineness |
/um |
Appearance |
|
|
Usage |
Color strength |
100% |
|
|
Fluidity |
/mm |
Shelf life |
12months |
|
Single net weight |
5KG |
Resin type |
/ |
|
Ionic |
/ |
Appearance color |
一．Substrates
Denim(except coated fabric,press polish fabric) , silicone oil cloth, Nylon,TPU and PU leather.
二．Performance and indicators
Appearance and composition:translucent viscous body,polyester
Brinell viscosity:120000~140000cps
PH Value:7.0±0.5
Solid content:50%±1
三．Features
PU200A denim watherbased ink white（anti-freeze/anti-pollution type）：excellent fastness,non-stick,high glossiness,super well wash fastness,high adhesion,resistance to yellowing,anti-freeze type.
PU200B denim waterbased ink clear（anti-freeze/anti-pollution type）：excellent fastness,non-stick,high glossiness,super well wash fastness,high adhesion,resistance to yellowing,anti-freeze type.
四．Reference formula
|
Dark |
Light |
||
|
CH-200 denim ink white |
20% |
CH-200 denim ink white |
60% |
|
CH-200 denim ink transparent |
80% |
CH-200 denim transparent |
40% |
|
paste |
3-5% |
paste |
3-5% |
|
1008 curing agent |
2.5% |
1008curing agent |
2.5% |
|
1.before：add curing agent into paste and stir completely, the amount of printing paste should controlled within 8% 2.After: The finished product natural drying after 24hours,or heat pressure at 180℃ for 20 seconds,or baked at 180℃ for 2-3minutes and then wash 3.The graphite mucilage with curing agent should used up within 6-8hours. |
|||
Notes
Due to the variety of denim fabric, you would better make a test before printing, printing on the fabric with layer, should have a test about viscosity of fabric layer and PU system.
收藏此信息
免責聲明：以上信息由用戶自行提供，內容的真實性、準確性和合法性由發布用戶負責。集萃印花網對此不承擔任何責任。
、
集萃印花技術交流2群、
集萃印花招聘/求職2群
安卓APP
微信號：yinhuashijie
手機版
《印花世界》雜志
微信群接入口
客服
