一．適用：

牛仔布(涂層布，壓光布除外)、硅油布、尼龍布、TPU、PU皮革等。

二．性能指標：

外觀及組成：白色狀粘稠體，聚氨酯聚合物

布氏粘度：120000~140000CPS

PH值：7.0±0.5

離子類型：陰離子

固體含量：50%±1

三．特性：

立體感強，高附著力，觸邊性好，透明性好，表面光滑。牢度超強、不粘手、高光澤、耐石磨洗、雪花洗、漂洗、酵素洗、酸洗、耐高溫蒸煮。耐黃變.5-35℃常溫下保存12個月，屬于環保型膠漿。

四．操作應用：

1．本產品一般使用80目120目網布，根據圖案的不同絲網一定要繃緊，這一點相當關鍵：

2．為了保證印制效果，一般不要制作太厚網版，根據厚度不同需要印5—8次，在使用厚網版印刷時印完第一次需待底層干透后再進行第二次印刷，一般印刷3—4次就能達到2-3毫米以上的高度。

3．本產品不易塞網，過稠時可加入適當水漿攪拌均勻進行稀釋。

4．在自然風干48小時后，再過溫150度8-15秒，過溫時盡量將面料過反面。

5．如需提高牢度，使用時可加入1%-2%催化劑或交聯劑。

Otherdetailedinformation

一．Substrates

Uncoatedornon-presseddenim,siliconcoated,nylon,TPUorPUleather.

二.Indicatorsofperformance:

Appearanceandcomposition:whitedope,polyurethanepolymer

Brinellviscosity:120000～140000CPS

PH:7.0±0.5

Ionictype:anion

Solidcontent:50%±1

三.Productfeatures:

Highstackingproper,goodadhesionfastnesstofabrics,goodthixotropy,greattransparency,smoothfinish,superfastness,non-after tack,high glossiness,resistance to stone wash、snow wash、bleach、enzyme and acid wash.Resistance to high temperature steaming,yellowing.It can be stored at normal temperature of 5-35℃ for 12 months.It belongs to environmental paste.

四．Applicationofoperation

1.using80meshscreenand120meshscreen.Thekeypointisthescreenshouldbetightenedaccordingtodifferentpatterns.

2.Inordertoguaranteetheprintingeffect,donotmakethickaccordingtodifferentthicknessshouldbeprintedfivetoeighttimes.Whenusingthethickscreenprinting,youcanprintinthesecondtimeafterthebottomiscompletelydriedoffirsttime.Itcanreachmorethantwotothreemmheightwhenithasbeenprintedthreetofourtimesingeneral.

3.Thisproductiseasytoprintthroughfinemeshscreen,youcanaddappropriatewaterslurrytodilutewhentheitistoothick.

4.Afterthefortyeighthoursofnaturalairdry, and then over-temperature at 150℃ for 8-15 seconds.In the process of over-temperature,fabrics should be in opposite side as soon as possible.

5.Ifneedtoincreasethefastness,youcouldadd1-2% catalyst or cross-linker in usage.