一．適用：

本產品適用于棉布，滌棉布、針織、梳織、TC布、腈綸、牛仔布及其它紡織品來做熱轉印植絨或燙金用途。用于轉移植絨及燙金工藝。

二．性能及指標：

乳白色糊狀，丙稀酸特殊體合成。

固含量：65±2%

PH值：6.5-7.5

離子電荷：非離子

三．特性：

熱轉印后的印花圖案有極強耐水洗效果。洗水牢度好，彈性高，手感柔軟，加入2%1008免烘固化劑可大幅提高牢度。（雙組份）

四．操作流程：

印花-自然干將植絨紙或燙金紙放置圖案表面壓燙機壓燙（壓燙溫度150—170℃，10秒—20秒，然后將植絨紙或燙金薄膜除去）成品（正反壓燙二次效果更佳）

五．注意事項：

產品工業使用，禁止兒童接觸，若眼睛接觸立即用流動清水沖洗15分鐘以上，酌情就醫。如皮膚接觸用肥皂和清水沖洗干凈。測試產品務必在涂飾48小時后檢測方可達到最佳效果。

Other detailed information

一．Substrates

This product is suitable for cotton, polyester cotton,knit,woven,TC cloth,acrylic fibers,denim and other textiles to make transfer flock base or gold stamping.It is used for transfer flocking and gold stamping technology.

二．Performance and indicators

Milky white paste,acrylic special polymer

Solid content: 65±2%

PH Value:6.5-7.5

Ionic :non-ionic

三．Characters

After heat transfer printing,the printing pattern has good resistance to wash.good wash fastness,high elasticity,soft hand feel,add 2%1008 free of baking fixing agent to improve fastness.(two-component)

四．Operation process

Printing--dry naturally and place the flocking paper or hot stamping foil on the surface to use press machine to press(press temperature 150-170℃，10-20seconds,and then remove the flocking paper or hot stamping foil.)finished product(press in two sides two times reach better effect.)

五．Notes

Industrial products,banish children to touch,if enters into eyes,using water to rinse more than 15 minutes at instant,or consider to go to hospital.If the skin touch this product,using soap and water to rinse.Making a test for product must after 48hours, so that it could reach the best effect.

Other detailed information

一．Substrates

This product is suitable for cotton, polyester cotton,knit,woven,TC cloth,acrylic fibers,denim and other textiles to make transfer flock base or gold stamping.It is used for transfer flocking and gold stamping technology.

二．Performance and indicators

Milky white paste,acrylic special polymer

Solid content: 65±2%

PH Value:6.5-7.5

Ionic :non-ionic

三．Characters

After heat transfer printing,the printing pattern has good resistance to wash.good wash fastness,high elasticity,soft hand feel,add 2%1008 free of baking fixing agent to improve fastness.(two-component)

四．Operation process

Printing--dry naturally and place the flocking paper or hot stamping foil on the surface to use press machine to press(press temperature 150-170℃，10-20seconds,and then remove the flocking paper or hot stamping foil.)finished product(press in two sides two times reach better effect.)

五．Notes

Industrial products,banish children to touch,if enters into eyes,using water to rinse more than 15 minutes at instant,or consider to go to hospital.If the skin touch this product,using soap and water to rinse.Making a test for product must after 48hours, so that it could reach the best effect.